iVIGA Tap Factory Supplier
What should I do if the shower sprinkler has small water flow, curenja, or is blocked?
Showers are commonly used at home. What if one day suddenly finds that the water flow is very small, the shower is leaking, or the shower is blocked? Do you know how to fix it? Is it the cause? Let’s take a look at how to deal with these things.
What is the reason for the small water sprinkling
Whether it is a workplace worker who is mentally stressed or a worker who consumes a lot of physical energy, whenever the body and mind is exhausted, just take a decompression hot bath to refresh and refresh. The blood is resurrected, but it is drizzle when the flower is opened?
1. Is the tap water pressure of the user’s home smaller than before: Ako je tako, you need to find a tap water company to check the water supply pipeline and pressure
2. The valve of the pipeline connected to the water heater is opened smaller: open the water inlet valve larger.
3. Due to the high floor and the low water pressure of the water source, the water output will be smaller after the pressure is reduced by the mixing valve. U ovo vrijeme, it is recommended to connect a water heater in series between the water supply valve and the water inlet Booster pump.
4. The water mixing valve is congenital inadequate, the diameter is small, and the throttling causes the water output to become small: the inlet end of the detachable water mixing valve, try to connect it to the water heater’s water supply valve with a hose, or connect the nozzle hose directly to Try the hot water outlet end of the water heater, and distinguish the quality of the mixing valve according to the water output of the nozzle; replace the mixing valve of the formal brand under the premise of the water pressure of the water source.
5. Nepravilna instalacija, deformed rubber ring, uneven or thin water outlet pipe joint, mismatch between hose and shower, itd.: Select the appropriate hose and shower according to the specifications, zamijenite gumeni prsten, i ponovo instalirati.
6. The sprinklers are congenital insufficiency and large internal resistance leads to small water output: replace the sprinklers.
7. The shower pipe is broken, and the pipe is clogged to prevent water: the water pipe needs to be protected during use. Although the creases will not only affect the appearance, but there are many creases that are prone to water leakage.
8. The nozzle is clogged, resulting in poor water flow. Generalno, if the water in the home is too alkaline and contains some impurities, it is easy to block the shower holes; pored toga, air deposits and dust will enter the interior through the shower holes and accumulate for a long time. It will also block the shower; improper adjustment of the shower nozzle may also cause the increase of foreign matter and scale.
The solution to the nozzle blockage
1. Rotate and adjust the shower nozzle.
2. After disassembling the nozzle, place the nozzle with the spray eye facing upward, and find a soft object to gently touch it to shake off the clogged gravel. U isto vreme, clean the nozzles one by one, and then repeatedly clean them with clean water. , Then install and restore.
3. Go to the supermarket to buy a bottle of descaling agent to remove dirt, and remove the shower head. Put it in the water and clean it well with a descaling agent, and generally it will be faster to clean it with warm water. After rinsing, be sure to wipe off the descaling agent left on the shower head, and then install the shower head as it was.
4. Take out a little vinegar (rice vinegar) and immerse the shower in the vinegar. Be sure to immerse all the small holes in the vinegar. Wait about ten minutes before taking it out, and then rinse with water to remove the vinegar remaining in the shower.
Osim toga, if your shower head is fixed on the wall, it cannot be removed and soaked in vinegar. You can fill the sprinkler with a plastic bag filled with vinegar, stick it with tape and let it sit overnight, and then remove the vinegar bag the next morning. But be careful not to stick the tape to the wire board or paint.
U isto vreme, be careful not to use strong acid when removing scale, so as not to cause corrosion to the shower surface.
What should I do if the shower is leaking?
Shower blockage problem
If the shower nozzle is used for a long time, the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to be blocked. U ovo vrijeme, the brand’s after-sales service will be effective. When buying a shower, you don’t have to choose well-known brands, but you must choose those brands that everyone recognizes.
Shower plating problem
It is ugly to see the paint peeling off the coating of the shower head. If you have just bought the shower head for a short time, this problem will affect the appearance. Osim toga, some poor-quality showers will block because of paint falling off. So we have to take a closer look at whether there are any problems with the surface of the purchased shower head.
When buying a shower, you must carefully observe whether the surface of the shower is smooth or not. If it feels a bit rough to the touch, it must be a second-processed shower, let alone the quality.
Material problem
Some showers are made of plastic or cast iron. Plastic materials may add a lot of waste, and the service life will not be very long. Naravno, some hand-held showers can use organic glass ABS and other materials. kako god, it is not recommended that you choose the shower head made of cast iron, which is extremely easy to rust. Many customers regretted the purchase of this shower head. Because it didn’t take long before it started to rust. Even if it looks ugly, it also clogs the water outlet, it is best if the entire shower is broken. Trenutno, the best material is pure copper shower head. If it is good in the market, most of it is made of pure copper.
What should I do if the shower head leaks?
1. Kako proceniti da li glava tuša curi
1. Pokrijte otvor za izlaz vode na glavi tuša dlanom, and use your mouth to blow into the water inlet to check whether there is water leakage. Ako postoji curenje, glava tuša će procuriti.
2. When the shower head is flowing with water, it is slightly tilted on one side when the water is discharged, lako je vidjeti da li glava tuša curi.
3. Multifunctional shower heads are the easiest to leak when they have dual functions. Neke glave tuša ne propuštaju vodu samo u jednom uzorku, but it is difficult to ensure that they will not leak under dual functions.
2. Kako riješiti problem curenja vode u glavi tuša
1. Popravite curenje na lopti upravljača glave tuša.
Rešenje: Najprije odvrnite glavu tuša od kugličnog prstena upravljača, pronađite O-prsten ili sličnu brtvu unutra i zamijenite ga, a zatim vratite glavu tuša u prvobitni položaj.
2. Leakage occurs at the joint of the shower head handle.
Rešenje: Odaberite odgovarajuće crijevo za tuš i slavinu u skladu sa specifikacijama, zamijenite njegov gumeni prsten, i ponovo ga instalirajte. Prvo upotrijebite kliješta za vezivanje da odvrnete ručku glave tuša od crijeva. Očistite navoj na ručki glave tuša, i premažite vodovodnu cijev posebnim ljepilom ili zavežite cijev za vodu posebnom trakom na okolno područje. Zatim okrenite glavu tuša unazad i zategnite je, i uklonite višak ljepila i trake.
3. Curenje vode u glavi tuša također može biti uzrokovano pijeskom ili sedimentom u glavi tuša, ili nakupljene naslage peruti i minerala.
Rešenje: Odvrnite glavu tuša radi čišćenja. Ako je potrebno, natopite dijelove sirćetom, i izribajte dijelove, pazeći da ih ne ogrebete. Ako je tuš glava podesivog tipa raspršivača, pažljivo provjerite sve pokretne dijelove na znakove prekomjernog trošenja. Ako se rotirajuća ručka ne može kretati glatko ili je unutrašnji breg polomljen, potrebno je zamijeniti cijelu glavu tuša.
4. Fina voda iz glave tuša postaje mješavina grube i fine.
Rešenje: Okrenite i podesite glavu tuša. Ako i dalje ne radi, otvorite mali okrugli poklopac na sredini glave tuša odvijačem, otvorite glavu tuša i isperite vodom. Rupu za tuširanje možete i četkati četkicom za zube, a zatim ga instalirajte i vratite u prethodno stanje. mogu.
Šta učiniti ako tuš prokišnjava uči nas kako da riješimo problem tuša. kako god, kako bi se u potpunosti eliminirao problem curenja vode u tušu, potrebno je kupiti proizvode sa zagarantovanim kvalitetom, obratite pažnju na održavanje, i zamijenite ih na vrijeme kada istekne vijek trajanja. Svaki korak se mora pratiti na mjestu.
Šta da radim ako je glava tuša blokirana?
Nakon dužeg perioda upotrebe, glava tuša će biti blokirana. Ovo je prirodno. To ne znači da je glava tuša polomljena. ne brini, uopste ne morate da kupujete novi. To je zbog stvaranja kamenca nakon dugotrajnog ispuštanja vode. , Potrebno je samo rastaviti i očistiti glavu tuša.
Dip in vinegar
Ako je vaša glava tuša bila blokirana duže vrijeme, i veliki broj rupa je blokiran. So using a needle to pierce one by one is obviously not showing up. U ovom slučaju, preporučljivo je da koristite zakiseljavanje za uklanjanje prašine kako biste riješili problem začepljenih tuš glava. Morate pripremiti malo bijelog sirćeta. Sipajte sirće u umivaonik tako da glava tuša može biti potopljena. Nakon namakanja u sirćetu desetak minuta, kamenac u glavi tuša se može ukloniti.
Acupuncture
Ako su neke od malih rupa u tušu u vašoj kući začepljene, then let the water out first, and you can see that the holes are blocked at the bottom. Zatim morate otvoriti glavu tuša i vidjeti da ima mnogo malih rupa na glavi tuša poput glave tuša. Ovdje voda izlazi. Zatim prvo pripremimo iglu, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. Ova metoda je najjednostavnija, ali pazite da probušite rupu za tuširanje.
Koristite lubrikant
If the metal of the shower head is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. This method may be used if the shower head in your home is not made of stainless steel.
