iVIGA Tap Factory Supplier
Installing hot and cold water faucets is the choice of many friends’ dekorasyon sa balay, so we don’t have to worry about washing our face with cold water and gargle in winter, then how to install the hot and cold water faucets?
1. Pag-instalar sa single hole basin faucet
Kung nagpalit usa ka gripo sa usa ka kuptanan nga basin, you should pay attention to the diameter of the water outlet. Sa pagkakaron, most of the water in the market is filled with hard pipes. Pay attention to the reserved water pipe height, nga mahitungod sa 30 minutes from the basin. Atol sa pag-instalar, kinahanglan nga pilion ang usa ka espesyal nga anggulo nga balbula. The angle valve must be fixed to the hot and cold water pipes from the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to extend the link. Do not use other water pipes to connect, otherwise it will leak or fall off due to high water pressure. Kung ang inlet pipe taas kaayo nga molapas sa outlet pipe, just cut off the excess.
Nota: Do not hard bend the water pipe to 90 degree o labaw pa sa 90 grado. Sa diha nga ang pag-instalar sa planggana aron mahubas, palihug ayaw kalimot sa pagpalit sa gamay nga connector sa gripo (short-circuit ang gripo). The water pipes buried in the wall must be flushed before installation.
2. Installation of shower and bathtub faucet
If you buy a shower, kaligoanan, o gripo nga gitaod sa bungbong, you need to choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes is about 20 o daghan pa. Flush the water pipe before installation to avoid damage to the faucet due to hard water.
Concealed shower and bathtub faucets: Human sa pagpalit sa usa ka gitago nga gripo, ang balbula nga kinauyokan sa gripo kasagaran gilubong sa bungbong. Consider the thickness of the bathroom wall before embedding. Kung ang bungbong nipis kaayo, ang balbula core dili ma-embed. Ayaw kuhaa ang plastic protective cover sa valve core nga dali sa panahon sa pre-embedding, so as to avoid damage to the valve core by cement and other chores. Dugang pa, kinahanglan nimo nga hatagan pagtagad ang taas ug ubos, wala ug tuo nga direksyon sa spool kung i-embed ang spool aron malikayan ang sayup nga spool.
3. Pag-instalar sa thermostatic nga gripo
Sa wala pa i-install ang thermostatic gripo, first check which side of the water pipe is cold water and which side is hot water, especially if the hot and cold water pipes are connected incorrectly, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use thermostatic faucets, mainly because the water pressure is too low. The installation of thermostatic faucet also requires the installation of hot and cold water filters.
4. Pag-instalar sa single-hole nga gripo sa kusina
Because the kitchen faucet is used frequently, and it is easy to loosen when moved around, all requirements for stability are taken for granted, busa ang lock nut kinahanglan nga hugot. Sa pagkakaron, there are a number of spiral pipes whose leading heads are enlarged nuts in the building materials market, which have excellent stability. Obvious effects will become the trend of the generation.
Reviews
Installing hot and cold water faucets at home can indeed solve many problems. It is no wonder that so many friends want to know the installation methods of hot and cold water faucets. I hope you can understand the installation methods of hot and cold water faucets introduced in this article.
