iVIGA čiaupų gamyklos tiekėjas
Installing hot and cold water faucets is the choice of many friends’ Namų dekoravimas, so we don’t have to worry about washing our face with cold water and gargle in winter, then how to install the hot and cold water faucets?
1. Installation of single hole basin faucet
Perkant vienos rankenos praustuvo maišytuvą, you should pay attention to the diameter of the water outlet. Šiuo metu, most of the water in the market is filled with hard pipes. Pay attention to the reserved water pipe height, kuri yra apie 30 minutes from the basin. Diegimo metu, reikia pasirinkti specialų kampinį vožtuvą. The angle valve must be fixed to the hot and cold water pipes from the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to extend the link. Do not use other water pipes to connect, otherwise it will leak or fall off due to high water pressure. Jei įleidimo vamzdis per ilgas, kad viršytų išleidimo vamzdį, just cut off the excess.
Pastaba: Do not hard bend the water pipe to 90 laipsnių ar daugiau nei 90 laipsnių. Įrengiant baseiną nutekėti, please do not forget to purchase the small connector of the faucet (trumpai sujunkite maišytuvą). The water pipes buried in the wall must be flushed before installation.
2. Dušo ir vonios maišytuvo montavimas
If you buy a shower, vonia, arba sieninis maišytuvas, you need to choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes is about 20 ar daugiau. Flush the water pipe before installation to avoid damage to the faucet due to hard water.
Paslėpti dušo ir vonios maišytuvai: Įsigijus potinkinį maišytuvą, maišytuvo vožtuvo šerdis paprastai yra iš anksto įkasta į sieną. Consider the thickness of the bathroom wall before embedding. Jei siena per plona, vožtuvo šerdis nebus įdėta. Išankstinio įdėjimo metu lengvai nenuimkite vožtuvo šerdies plastikinio apsauginio dangtelio, kad būtų išvengta vožtuvo šerdies pažeidimo dėl cemento ir kitų darbų. Be to, you should pay attention to the up and down, left and right directions of the spool when embedding the spool to avoid the wrong spool.
3. Installation of thermostatic faucet
Prieš montuodami termostatinį maišytuvą, first check which side of the water pipe is cold water and which side is hot water, especially if the hot and cold water pipes are connected incorrectly, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use thermostatic faucets, mainly because the water pressure is too low. The installation of thermostatic faucet also requires the installation of hot and cold water filters.
4. Installation of single-hole kitchen faucet
Because the kitchen faucet is used frequently, and it is easy to loosen when moved around, all requirements for stability are taken for granted, todėl fiksavimo veržlė turi būti priveržta. Šiuo metu, there are a number of spiral pipes whose leading heads are enlarged nuts in the building materials market, which have excellent stability. Obvious effects will become the trend of the generation.
Reviews
Installing hot and cold water faucets at home can indeed solve many problems. It is no wonder that so many friends want to know the installation methods of hot and cold water faucets. I hope you can understand the installation methods of hot and cold water faucets introduced in this article.
