iVIGA Tap Factory Supplier
In the entire home decoration, only the kitchen and bathroom will use the faucet, but although only these two places will use it, the types of faucets used are also diverse. The installation of different faucets will be different, today I will introduce the installation methods of various faucets.
Before installation, you must first prepare the installation tools, and check whether the supporting parts are complete before installation. Common faucet parts include: hoses, rubber washers, ranonorana, drainers, tehina, decorative caps, sns. Manaraka, I will introduce the installation methods of various faucets.
1. Installation of single-hole kitchen faucet
It is required to be stable, because the kitchen faucet is used frequently, and it is easily loosened when being moved around, noho izany dia tsy maintsy henjana ny nut hidin-trano. Amin'izao, there are some faucets on the market to fix the screw tube with enlarged nut. Tena tsara tokoa ny fiantraikan'ny stabilization toy izany. Raha toa ka voavaha ny olana momba ny fanesorana ny rano sy ny fampiakarana, ho fironana malaza izany amin'ny ho avy.
2. Installation of single hole basin faucet
When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. amin'izao fotoana izao, an'ny fantsona mafy ny ankamaroan'ny rano eny an-tsena, so you should pay attention to the height of the upper spout. It is appropriate to go down from the basin 35 work points**. Nandritra ny fametrahana, tsy maintsy mifidy valva zoro manokana, ary ny valva zoro dia tsy maintsy apetraka amin'ny fantsona rano mafana sy mangatsiaka avy amin'ny rindrina. Rehefa hitanao fa misy elanelana eo amin'ny valva zoro sy ny fantsona rano eo amin'ny faucet, buy a special extension pipe to connect it. Tsarovy, you must not use other water pipes to connect, satria raha ambony ny tosi-drano, ho mora latsaka sy hivoaka rano, causing you loss. Raha lava loatra ny sodina fidirana ka mihoatra ny sodina fivoahana, ny ampahany dia azo tapahina araka izay ilainao. If the angle is not suitable, azonao atao ny miforitra amin'ny toerana ilainao.
Tsarovy: Do not bend hard to 90 degrees or more than 90 fiakarana. Rehefa mametraka ny koveta mba tatatra, please do not forget to purchase the small connector of the faucet (short-circuit the faucet). Aza adino ny manasa ny fantsona rano nalevina ao amin'ny rindrina alohan'ny hametrahana azy.
3. Installation of shower and bathtub faucets (wall hanging)
After you have purchased a shower, koveta be fandroana, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must reach 15 cm. You must not forget to flush the water pipe before installation to avoid excessive water quality and damage to the faucet.
Installation of shower and bathtub faucets: After purchasing a concealed faucet, the valve core of the faucet is generally pre-buried in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the valve core will not be embedded. Do not remove the plastic protective cover of the valve core easily during pre-embedding, so as to avoid damage to the valve core by cement and other chores during pre-embedding. Ankoatry ny, you should pay attention to the up and down, left and right directions of the spool when embedding the spool to avoid the wrong spool. When the wall-mounted faucet is embedded in the water inlet pipe, there is a deviation in the size, and the adjustable crutches can be used to adjust the position.
4. Installation of thermostatic faucet
Alohan'ny fametrahana ny thermostatic faucet, please check whether the water pipes are hot on the left and cold on the other. Remember not to connect the hot and cold water pipes wrongly to avoid the faucet not working properly. Tsy afaka mampiasa faucet thermostatic ny fanafanana rano entona sy masoandro satria ambany loatra ny tsindry rano. Aza adino ny mametraka ny sivana rano mafana sy mangatsiaka rehefa mametraka ny faucet thermostatic.
