Pembekal Kilang iVIGA Tap
What should I do if the shower sprinkler has small water flow, kebocoran, or is blocked?
Showers are commonly used at home. What if one day suddenly finds that the water flow is very small, the shower is leaking, or the shower is blocked? Do you know how to fix it? Is it the cause? Let’s take a look at how to deal with these things.
What is the reason for the small water sprinkling
Whether it is a workplace worker who is mentally stressed or a worker who consumes a lot of physical energy, whenever the body and mind is exhausted, just take a decompression hot bath to refresh and refresh. The blood is resurrected, but it is drizzle when the flower is opened?
1. Is the tap water pressure of the user’s home smaller than before: Jika ya, you need to find a tap water company to check the water supply pipeline and pressure
2. The valve of the pipeline connected to the water heater is opened smaller: open the water inlet valve larger.
3. Due to the high floor and the low water pressure of the water source, the water output will be smaller after the pressure is reduced by the mixing valve. At this time, it is recommended to connect a water heater in series between the water supply valve and the water inlet Booster pump.
4. The water mixing valve is congenital inadequate, the diameter is small, and the throttling causes the water output to become small: the inlet end of the detachable water mixing valve, try to connect it to the water heater’s water supply valve with a hose, or connect the nozzle hose directly to Try the hot water outlet end of the water heater, and distinguish the quality of the mixing valve according to the water output of the nozzle; replace the mixing valve of the formal brand under the premise of the water pressure of the water source.
5. Improper installation, deformed rubber ring, uneven or thin water outlet pipe joint, mismatch between hose and shower, dll.: Select the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall.
6. The sprinklers are congenital insufficiency and large internal resistance leads to small water output: replace the sprinklers.
7. The shower pipe is broken, and the pipe is clogged to prevent water: the water pipe needs to be protected during use. Although the creases will not only affect the appearance, but there are many creases that are prone to water leakage.
8. The nozzle is clogged, resulting in poor water flow. Secara amnya, if the water in the home is too alkaline and contains some impurities, it is easy to block the shower holes; in addition, air deposits and dust will enter the interior through the shower holes and accumulate for a long time. It will also block the shower; improper adjustment of the shower nozzle may also cause the increase of foreign matter and scale.
The solution to the nozzle blockage
1. Rotate and adjust the shower nozzle.
2. After disassembling the nozzle, place the nozzle with the spray eye facing upward, and find a soft object to gently touch it to shake off the clogged gravel. Pada masa yang sama, clean the nozzles one by one, and then repeatedly clean them with clean water. , Then install and restore.
3. Go to the supermarket to buy a bottle of descaling agent to remove dirt, and remove the shower head. Put it in the water and clean it well with a descaling agent, and generally it will be faster to clean it with warm water. After rinsing, be sure to wipe off the descaling agent left on the shower head, and then install the shower head as it was.
4. Take out a little vinegar (rice vinegar) and immerse the shower in the vinegar. Be sure to immerse all the small holes in the vinegar. Wait about ten minutes before taking it out, and then rinse with water to remove the vinegar remaining in the shower.
Sebagai tambahan, if your shower head is fixed on the wall, it cannot be removed and soaked in vinegar. You can fill the sprinkler with a plastic bag filled with vinegar, stick it with tape and let it sit overnight, and then remove the vinegar bag the next morning. But be careful not to stick the tape to the wire board or paint.
Pada masa yang sama, be careful not to use strong acid when removing scale, so as not to cause corrosion to the shower surface.
What should I do if the shower is leaking?
Shower blockage problem
If the shower nozzle is used for a long time, the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to be blocked. At this time, the brand’s after-sales service will be effective. When buying a shower, you don’t have to choose well-known brands, but you must choose those brands that everyone recognizes.
Shower plating problem
It is ugly to see the paint peeling off the coating of the shower head. If you have just bought the shower head for a short time, this problem will affect the appearance. Sebagai tambahan, some poor-quality showers will block because of paint falling off. So we have to take a closer look at whether there are any problems with the surface of the purchased shower head.
When buying a shower, you must carefully observe whether the surface of the shower is smooth or not. If it feels a bit rough to the touch, it must be a second-processed shower, let alone the quality.
Material problem
Some showers are made of plastic or cast iron. Plastic materials may add a lot of waste, and the service life will not be very long. Sudah tentu, some hand-held showers can use organic glass ABS and other materials. Namun begitu, it is not recommended that you choose the shower head made of cast iron, which is extremely easy to rust. Many customers regretted the purchase of this shower head. Because it didn’t take long before it started to rust. Even if it looks ugly, it also clogs the water outlet, it is best if the entire shower is broken. Pada masa ini, the best material is pure copper shower head. If it is good in the market, most of it is made of pure copper.
What should I do if the shower head leaks?
1. Bagaimana menilai sama ada kepala mandi bocor
1. Tutup saluran air kepala mandi dengan telapak tangan anda, and use your mouth to blow into the water inlet to check whether there is water leakage. Sekiranya ada kebocoran, Kepala mandi akan bocor.
2. When the shower head is flowing with water, it is slightly tilted on one side when the water is discharged, Sangat mudah untuk melihat sama ada kepala mandi bocor.
3. Multifunctional shower heads are the easiest to leak when they have dual functions. Beberapa kepala mandi tidak membocorkan air hanya dalam satu corak, but it is difficult to ensure that they will not leak under dual functions.
2. Cara menyelesaikan masalah kebocoran air di kepala mandi
1. Membaiki kebocoran di bola stereng kepala mandi.
Penyelesaian: Pertama lepaskan kepala mandi dari cincin bola stereng, cari o-ring atau meterai yang serupa di dalam dan gantikannya, dan kemudian putar kepala mandi kembali ke kedudukan asalnya.
2. Leakage occurs at the joint of the shower head handle.
Penyelesaian: Pilih hos mandi dan keran yang sesuai mengikut spesifikasi, ganti cincin getahnya, dan memasangnya semula. Pertama Gunakan tang lashing untuk membongkar pemegang kepala mandi dari hos. Bersihkan benang pada pemegang kepala mandi, dan melapisi pelekat khas paip air atau mengikat pita khas paip air di kawasan sekitarnya. Kemudian putar kepala mandi kembali dan ketatkannya, dan keluarkan pelekat dan pita yang berlebihan.
3. Kebocoran air di kepala mandi juga boleh disebabkan oleh pasir atau sedimen di kepala mandi, atau deposit berkumpul dan mineral yang terkumpul.
Penyelesaian: Buka kepala pancuran untuk pembersihan. Jika perlu, Rendam bahagian dengan cuka, dan menggosok bahagian, Berhati -hati untuk mengelakkan menggaru mereka. Sekiranya kepala mandi adalah jenis semburan laras, Periksa dengan teliti semua bahagian bergerak untuk tanda -tanda haus yang berlebihan. Sekiranya pemegang berputar tidak dapat bergerak lancar atau cam dalaman rosak, Keseluruhan kepala mandi perlu diganti.
4. Air halus dari kepala pancuran menjadi campuran kasar dan halus.
Penyelesaian: Putar dan laraskan kepala mandi. Sekiranya masih tidak berfungsi, Buka topi bulat kecil di tengah -tengah kepala pancuran dengan pemutar skru, Buka kepala mandi dan bilas dengan air. Anda juga boleh menyikat lubang mandi dengan berus gigi, dan kemudian pasang dan pulihkannya. boleh.
Apa yang perlu dilakukan sekiranya mandi bocor mengajar kita bagaimana menyelesaikan masalah mandi. Namun begitu, Untuk menghapuskan sepenuhnya masalah kebocoran air di bilik mandi, adalah perlu untuk membeli produk dengan kualiti yang dijamin, Perhatikan penyelenggaraan, dan menggantikannya dalam masa ketika hayat perkhidmatan selesai. Setiap langkah mesti diikuti di tempat.
Apa yang harus saya lakukan sekiranya kepala mandi disekat?
Setelah tempoh penggunaan yang panjang, Kepala mandi akan disekat. Ini semula jadi. Ini tidak bermaksud bahawa kepala mandi rosak. Jangan risau, anda tidak perlu membeli yang baru sama sekali. Ini disebabkan oleh pembentukan skala selepas pelepasan air jangka panjang. , Anda hanya perlu membongkar dan membersihkan kepala mandi.
Dip in vinegar
Sekiranya kepala mandi anda telah disekat untuk masa yang lama, dan sebilangan besar lubang telah disekat. So using a needle to pierce one by one is obviously not showing up. Dalam kes ini, Adalah disyorkan bahawa anda menggunakan pengasidan untuk menghilangkan habuk untuk menyelesaikan masalah kepala mandi tersumbat. Anda perlu menyediakan cuka putih. Tuangkan cuka ke dalam lembangan supaya kepala mandi dapat tenggelam. Setelah merendam cuka selama kira -kira sepuluh minit, Skala di kepala mandi boleh dikeluarkan.
Acupuncture
Sekiranya beberapa lubang kecil di bilik mandi di rumah anda disekat, then let the water out first, and you can see that the holes are blocked at the bottom. Kemudian anda perlu membuka kepala mandi mandi dan melihat bahawa terdapat banyak lubang kecil di kepala mandi seperti kepala mandi. Di sinilah air keluar. Kemudian kami mula -mula menyediakan jarum, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. Kaedah ini adalah yang paling mudah, Tetapi berhati -hati untuk menusuk lubang mandi.
Gunakan pelincir
If the metal of the shower head is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. This method may be used if the shower head in your home is not made of stainless steel.
