iVIGA ٽيپ فيڪٽري فراهم ڪرڻ وارو
Prepare the installation tools and check whether the supporting parts are complete before installation. Common faucet parts are: هوز, rubber washers, برسات, نالن, ڪڇي, decorative caps, وغيره.
Installation of single-hole basin faucet
When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. اڄڪلهه, مارڪيٽ ۾ گهڻو پاڻي سخت پائپ سان تعلق رکي ٿو, so you should pay attention to the height of the upper spout. It is appropriate to go down from the basin 35 work points**. انسٽاليشن دوران, هڪ خاص زاويه والو چونڊيو وڃي, ۽ زاويه والو کي ڀت مان گرم ۽ ٿڌو پاڻي جي پائپ تي مقرر ڪيو وڃي. جڏهن توهان ڳوليندا آهيو ته نل تي زاويه والو ۽ پاڻي جي پائپ جي وچ ۾ فاصلو آهي, buy a special extension pipe to connect it. ياد رکو, you must not use other water pipes to connect, ڇاڪاڻ ته جيڪڏهن پاڻي جو دٻاء اعلي آهي, اهو آساني سان ڪري ڇڏيندو ۽ پاڻي لڪي ويندو, causing you loss. جيڪڏهن انٽ پائپ تمام ڊگهو آهي ته آئوٽليٽ پائپ کان وڌي وڃي, حصو توهان جي ضرورتن مطابق ڪٽي سگهجي ٿو. جيڪڏهن زاويه مناسب نه آهي, توھان ان کي موڙي سگھوٿا توھان جي ضرورت واري پوزيشن ڏانھن. ياد رکو: Do not bend hard to 90 degrees or more than 90 درجا. ڊرين کي نصب ڪرڻ وقت, please don’t forget to purchase the small connector of the faucet (short-circuit the faucet). مھرباني ڪري ان کي انسٽال ڪرڻ کان اڳ ڀت ۾ دفن ٿيل پاڻي جي پائپ کي فلش ڪرڻ نه وساريو.
Installation of shower and bathtub faucet (wall hanging)
After you have purchased a shower, باٿ ٽب, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must reach 15 سي ايم. انسٽاليشن کان اڳ, you must not forget to flush the water pipe to prevent the water from being too hard and causing damage to the faucet.
Concealed shower and bathtub faucets: After purchasing a concealed faucet, the valve core of the faucet is generally pre-buried in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the valve core will not be embedded. Do not remove the plastic protective cover of the valve core easily during pre-embedding, so as to avoid damage to the valve core by cement and other chores. ان کان علاوه, you should pay attention to the up and down, left and right directions of the spool when embedding the spool to avoid the wrong spool. When the wall-mounted faucet is pre-embedded in the water inlet pipe, there is a deviation in the size, and the adjustable crutches can be used to adjust the position.
Installation of thermostatic faucet
thermostatic faucet انسٽال ڪرڻ کان اڳ, please check if the water pipes are hot on the left and cold on the other. Remember not to connect the hot and cold water pipes wrongly to avoid the faucet not working properly. گئس ۽ سولر واٽر هيٽر استعمال نٿا ڪري سگهن thermostatic faucets ڇاڪاڻ ته پاڻي جو دٻاءُ تمام گهٽ آهي. گرم ۽ ٿڌو پاڻي جو فلٽر نصب ڪرڻ نه وساريو جڏهن thermostatic faucet انسٽال ڪريو.
