Dobavitelj tovarne pip iVIGA
Prepare the installation tools and check whether the supporting parts are complete before installation. Common faucet parts are: cevi, rubber washers, prhe, odtoki, crutches, decorative caps, itd.
Installation of single-hole basin faucet
When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. Dandanes, večina vode na trgu spada v trde cevi, so you should pay attention to the height of the upper spout. It is appropriate to go down from the basin 35 work points**. Med namestitvijo, treba je izbrati poseben kotni ventil, in kotni ventil mora biti pritrjen na cevi za toplo in hladno vodo iz stene. Ko ugotovite, da je razdalja med kotnim ventilom in vodovodno cevjo na pipi, buy a special extension pipe to connect it. Ne pozabite, you must not use other water pipes to connect, ker če je pritisk vode visok, zlahka bo odpadel in puščal vodo, causing you loss. Če je vstopna cev predolga, da bi presegla izhodno cev, del lahko odrežete glede na vaše potrebe. Če kot ni primeren, lahko ga upognete v želeni položaj. Ne pozabite: Do not bend hard to 90 degrees or more than 90 stopnje. Pri namestitvi umivalnika za odtok, please don’t forget to purchase the small connector of the faucet (short-circuit the faucet). Prosimo, ne pozabite izprati vodovodne cevi, ki je zakopana v steno, preden jo namestite.
Installation of shower and bathtub faucet (wall hanging)
After you have purchased a shower, kopalna kad, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must reach 15 cm. Pred namestitvijo, you must not forget to flush the water pipe to prevent the water from being too hard and causing damage to the faucet.
Concealed shower and bathtub faucets: After purchasing a concealed faucet, the valve core of the faucet is generally pre-buried in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the valve core will not be embedded. Do not remove the plastic protective cover of the valve core easily during pre-embedding, so as to avoid damage to the valve core by cement and other chores. Poleg tega, you should pay attention to the up and down, left and right directions of the spool when embedding the spool to avoid the wrong spool. When the wall-mounted faucet is pre-embedded in the water inlet pipe, there is a deviation in the size, and the adjustable crutches can be used to adjust the position.
Installation of thermostatic faucet
Pred namestitvijo termostatske pipe, please check if the water pipes are hot on the left and cold on the other. Remember not to connect the hot and cold water pipes wrongly to avoid the faucet not working properly. Plinski in solarni grelniki vode ne morejo uporabljati termostatskih pip, ker je pritisk vode prenizek. Pri nameščanju termostatske pipe ne pozabite namestiti filtra za toplo in hladno vodo.
