iVIGA Tap Factory Supplier
What should I do if the shower sprinkler has small water flow, o tsoa, or is blocked?
Showers are commonly used at home. What if one day suddenly finds that the water flow is very small, the shower is leaking, or the shower is blocked? Do you know how to fix it? Is it the cause? Let’s take a look at how to deal with these things.
What is the reason for the small water sprinkling
Whether it is a workplace worker who is mentally stressed or a worker who consumes a lot of physical energy, whenever the body and mind is exhausted, just take a decompression hot bath to refresh and refresh. The blood is resurrected, but it is drizzle when the flower is opened?
1. Is the tap water pressure of the user’s home smaller than before: Haeba ho joalo, you need to find a tap water company to check the water supply pipeline and pressure
2. The valve of the pipeline connected to the water heater is opened smaller: open the water inlet valve larger.
3. Due to the high floor and the low water pressure of the water source, the water output will be smaller after the pressure is reduced by the mixing valve. Ka nako ena, it is recommended to connect a water heater in series between the water supply valve and the water inlet Booster pump.
4. The water mixing valve is congenital inadequate, the diameter is small, and the throttling causes the water output to become small: the inlet end of the detachable water mixing valve, try to connect it to the water heater’s water supply valve with a hose, or connect the nozzle hose directly to Try the hot water outlet end of the water heater, and distinguish the quality of the mixing valve according to the water output of the nozzle; replace the mixing valve of the formal brand under the premise of the water pressure of the water source.
5. Ts'ireletso e sa lokang, deformed rubber ring, uneven or thin water outlet pipe joint, mismatch between hose and shower, etc.: Select the appropriate hose and shower according to the specifications, Pheta lesale la rabara, le ho kenya.
6. The sprinklers are congenital insufficiency and large internal resistance leads to small water output: replace the sprinklers.
7. The shower pipe is broken, and the pipe is clogged to prevent water: the water pipe needs to be protected during use. Although the creases will not only affect the appearance, but there are many creases that are prone to water leakage.
8. The nozzle is clogged, resulting in poor water flow. Ka kakaretso, if the water in the home is too alkaline and contains some impurities, it is easy to block the shower holes; holim'a moo, air deposits and dust will enter the interior through the shower holes and accumulate for a long time. It will also block the shower; improper adjustment of the shower nozzle may also cause the increase of foreign matter and scale.
The solution to the nozzle blockage
1. Rotate and adjust the shower nozzle.
2. After disassembling the nozzle, place the nozzle with the spray eye facing upward, and find a soft object to gently touch it to shake off the clogged gravel. Ka nako e tšoanang, clean the nozzles one by one, and then repeatedly clean them with clean water. , Then install and restore.
3. Go to the supermarket to buy a bottle of descaling agent to remove dirt, and remove the shower head. Put it in the water and clean it well with a descaling agent, and generally it will be faster to clean it with warm water. After rinsing, be sure to wipe off the descaling agent left on the shower head, and then install the shower head as it was.
4. Take out a little vinegar (rice vinegar) and immerse the shower in the vinegar. Be sure to immerse all the small holes in the vinegar. Wait about ten minutes before taking it out, and then rinse with water to remove the vinegar remaining in the shower.
Holim'a moo, if your shower head is fixed on the wall, it cannot be removed and soaked in vinegar. You can fill the sprinkler with a plastic bag filled with vinegar, stick it with tape and let it sit overnight, and then remove the vinegar bag the next morning. But be careful not to stick the tape to the wire board or paint.
Ka nako e tšoanang, be careful not to use strong acid when removing scale, so as not to cause corrosion to the shower surface.
What should I do if the shower is leaking?
Shower blockage problem
If the shower nozzle is used for a long time, the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to be blocked. Ka nako ena, the brand’s after-sales service will be effective. When buying a shower, you don’t have to choose well-known brands, but you must choose those brands that everyone recognizes.
Shower plating problem
It is ugly to see the paint peeling off the coating of the shower head. If you have just bought the shower head for a short time, this problem will affect the appearance. Holim'a moo, some poor-quality showers will block because of paint falling off. So we have to take a closer look at whether there are any problems with the surface of the purchased shower head.
When buying a shower, you must carefully observe whether the surface of the shower is smooth or not. If it feels a bit rough to the touch, it must be a second-processed shower, let alone the quality.
Material problem
Some showers are made of plastic or cast iron. Plastic materials may add a lot of waste, and the service life will not be very long. Ehlile, some hand-held showers can use organic glass ABS and other materials. Leha ho le joalo, it is not recommended that you choose the shower head made of cast iron, which is extremely easy to rust. Many customers regretted the purchase of this shower head. Because it didn’t take long before it started to rust. Even if it looks ugly, it also clogs the water outlet, it is best if the entire shower is broken. Hajoale, the best material is pure copper shower head. If it is good in the market, most of it is made of pure copper.
What should I do if the shower head leaks?
1. Mokhoa oa ho ahlola hore na hlooho ea shaoara ea tsoa
1. Koahela phallo ea metsi ea hlooho ea shaoara ka letsoho la letsoho la hao, and use your mouth to blow into the water inlet to check whether there is water leakage. Haeba ho na le ho dutla, hlooho ea shaoara e tla lutla.
2. When the shower head is flowing with water, it is slightly tilted on one side when the water is discharged, ho bonolo ho bona hore na hlooho ea shaoara ea lutla.
3. Multifunctional shower heads are the easiest to leak when they have dual functions. Lihlooho tse ling tsa shaoara ha li lutle metsi ka mokhoa o le mong feela, but it is difficult to ensure that they will not leak under dual functions.
2. Mokhoa oa ho rarolla bothata ba ho tsoa ha metsi hloohong ea shaoara
1. Lokisa ho lutla ha bolo e tsamaisang hlooho ea shaoara.
Tharollo: Qala ka ho lokolla hlooho ea shaoara ho tloha lesale la bolo, fumana O-ring kapa tiiso e tšoanang ka hare 'me u e nkele sebaka, 'me u fetole hlooho ea shaoara ho khutlela sebakeng sa eona sa pele.
2. Leakage occurs at the joint of the shower head handle.
Tharollo: Khetha hose e loketseng ea shaoara le faucet ho latela litlhaloso, fetola reng ea eona ea rabara, ebe o e kenya hape. Qala ka ho sebelisa lithapo tsa ho phunya ho qhaqha mofeng oa hlooho ea shaoara. Hloekisa khoele letsohong la hlooho ea shaoara, 'me u apare phala ea metsi sekhomaretsi se khethehileng kapa tlama phala ea metsi tepi e khethehileng sebakeng se potolohileng. Ebe u khutlisetsa hlooho ea shaoara morao 'me ue tiise, 'me u tlose sekhomaretsi se feteletseng le tepi.
3. Ho dutla ha metsi ka hara hlooho ya shawara ho ka boela ha bakwa ke lehlabathe kapa mantle a hloohong ya shawara, kapa dander le liminerale tse bokelletsoeng.
Tharollo: Hlakola hlooho ea shaoara bakeng sa ho hloekisa. Haeba ho hlokahala, soak likarolo ka asene, le ho hohla likarolo, ho hlokomela ho qoba ho di ngoapa. Haeba hlooho ea shaoara e le mofuta oa sefafatsi se feto-fetohang, hlahloba ka hloko likarolo tsohle tse tsamaeang bakeng sa matšoao a ho senyeha ho feteletseng. Haeba molamu o potolohang o sa khone ho tsamaea hantle kapa khamera e ka hare e robehile, hlooho eohle ea shaoara e hloka ho nkeloa sebaka.
4. Metsi a matle a tsoang hloohong ea shaoara a fetoha motsoako oa mahoashe le a matle.
Tharollo: Fetola 'me u lokise hlooho ea shaoara. Haeba e ntse e sa sebetse, bula kepisi e nyane e chitja bohareng ba hlooho ya shaoara ka sekurufu, bula hlooho ea shaoara ebe o hlatsoa ka metsi. U ka boela ua hlatsoa lesoba la shaoara ka borashe ba meno, ebe o kenya le ho e tsosolosa. ka khona.
Seo re lokelang ho se etsa haeba shaoara e lutla e re ruta mokhoa oa ho rarolla bothata ba shaoara. Leha ho le joalo, ho felisa bothata ba ho tsoa ha metsi ka shaoareng ka botlalo, hoa hlokahala ho reka lihlahisoa tse nang le boleng bo tiisitsoeng, ela hloko tlhokomelo, 'me u li nkele sebaka ka nako ha bophelo ba tšebeletso bo felile. Mohato o mong le o mong o tlameha ho lateloa sebakeng.
Ke lokela ho etsa eng haeba hlooho ea shaoara e koetsoe?
Ka mor'a nako e telele ea tšebeliso, hlooho ea shaoara e tla thijoa. Sena ke tlhaho. Sena ha se bolele hore hlooho ea shaoara e robehile. Seke oa tšoenyeha, ha ho hlokahale hore u reke e ncha ho hang. Sena se bakoa ke ho thehoa ha sekala ka mor'a ho tsoa ha metsi nako e telele. , U hloka feela ho qhaqha le ho hloekisa hlooho ea shaoara.
Dip in vinegar
If your shower head has been blocked for a long time, and a large number of holes have been blocked. So using a needle to pierce one by one is obviously not showing up. Boemong bona, it is recommended that you use acidification to remove dust to solve the problem of clogged shower heads. You need to prepare some white vinegar. Pour the vinegar into a basin so that the shower head can be submerged. After soaking in vinegar for about ten minutes, the scale in the shower head can be removed.
Acupuncture
Haeba tse ling tsa masoba a manyane a shaoara ka tlung ea hau li thibiloe, then let the water out first, and you can see that the holes are blocked at the bottom. Ebe o tlameha ho bula hlooho ea shaoara 'me u bone hore ho na le masoba a mangata a manyane hloohong ea shaoara joalo ka hlooho ea shaoara.. Mona ke moo metsi a tsoang teng. Ebe re qala ho lokisa nale, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. Mokhoa ona ke oona o otlolohileng ka ho fetisisa, empa hlokomela ho phunya lesoba la shaoara.
Sebelisa lubricant
If the metal of the shower head is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. This method may be used if the shower head in your home is not made of stainless steel.
