iVIGA Tap Factory Supplier
Installing hot and cold water faucets is the choice of many friends’ palamuti sa bahay, so we don’t have to worry about washing our face with cold water and gargle in winter, then how to install the hot and cold water faucets?
1. Installation of single hole basin faucet
Kapag bumibili ng single-handle basin faucet, you should pay attention to the diameter of the water outlet. Sa kasalukuyan, most of the water in the market is filled with hard pipes. Pay attention to the reserved water pipe height, na tungkol sa 30 minutes from the basin. Sa panahon ng pag-install, dapat pumili ng isang espesyal na balbula ng anggulo. The angle valve must be fixed to the hot and cold water pipes from the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to extend the link. Do not use other water pipes to connect, otherwise it will leak or fall off due to high water pressure. Kung ang inlet pipe ay masyadong mahaba upang lumampas sa outlet pipe, just cut off the excess.
Tandaan: Do not hard bend the water pipe to 90 degree o higit pa sa 90 degrees. Kapag nag-install ng palanggana upang maubos, please do not forget to purchase the small connector of the faucet (short-circuit ang gripo). The water pipes buried in the wall must be flushed before installation.
2. Pag-install ng shower at bathtub faucet
If you buy a shower, bathtub, o gripo na nakadikit sa dingding, you need to choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes is about 20 o higit pa. Flush the water pipe before installation to avoid damage to the faucet due to hard water.
Mga nakatagong shower at bathtub faucet: Pagkatapos bumili ng nakatagong gripo, ang balbula core ng gripo ay karaniwang pre-buried sa dingding. Consider the thickness of the bathroom wall before embedding. Kung ang pader ay masyadong manipis, ang valve core ay hindi mai-embed. Huwag tanggalin nang madali ang plastic na proteksiyon na takip ng valve core sa panahon ng pre-embedding, upang maiwasan ang pinsala sa core ng balbula sa pamamagitan ng semento at iba pang mga gawain. At saka, dapat mong bigyang pansin ang pataas at pababa, kaliwa at kanang direksyon ng spool kapag ini-embed ang spool upang maiwasan ang maling spool.
3. Pag-install ng thermostatic faucet
Bago i-install ang thermostatic faucet, first check which side of the water pipe is cold water and which side is hot water, especially if the hot and cold water pipes are connected incorrectly, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use thermostatic faucets, mainly because the water pressure is too low. The installation of thermostatic faucet also requires the installation of hot and cold water filters.
4. Installation of single-hole kitchen faucet
Because the kitchen faucet is used frequently, and it is easy to loosen when moved around, all requirements for stability are taken for granted, so the lock nut must be tightened. Sa kasalukuyan, there are a number of spiral pipes whose leading heads are enlarged nuts in the building materials market, which have excellent stability. Obvious effects will become the trend of the generation.
Reviews
Installing hot and cold water faucets at home can indeed solve many problems. It is no wonder that so many friends want to know the installation methods of hot and cold water faucets. I hope you can understand the installation methods of hot and cold water faucets introduced in this article.
