iVIGA ٹیپ فیکٹری سپلائر
اسمارٹ ٹوائلٹ ہے۔ 8.5% ناکام. سرامک ٹوائلٹ ہیں 12.4% ناکام, نان کنٹیکٹ سپاؤٹ ہے۔ 32.9% ناکام.
اپریل کو 19, the General Administration of Market Supervision and Administration informed the 2021 national supervision and sampling of plumbing and sanitary ware product quality. The sampling of 988 کاروباری اداروں نے تیار کیا 1033 batches of plumbing and sanitary products, شامل سیرامک بیت الخلا, intelligent toilets, غیر رابطہ اسپاٹ, ceramic piece sealing spout, شاور, باتھ روم کا فرنیچر, household stainless steel sinks and other seven products. One batch of the products was suspected to be counterfeit, and the inspected unit was Chaozhou Chaoan District Vijana Sanitary Ware Co. They were labeled as the M031-3 jet siphon toilet of Fujian Over River Dragon Sanitary Ware Co. They have been referred to the local market supervision department of the enterprise. The inspection found that 157 مصنوعات کے بیچ ناکام ہوگئے, and the sampling failure rate is 15.2%.
From this follow-up sampling to the last unqualified enterprises have 75, وہاں ہیں 21 enterprises in this sampling is still unqualified, اور 54 enterprises qualified. From the sampling of industrial clusters of such products, کل 506 batches of products produced by enterprises in Guangdong Province were sampled and 65 batches were found to be unqualified, with a sampling failure rate of 12.8%. From the sampling of 261 batches of products produced by enterprises in Fujian Province, 43 batches were found to be unqualified, with a sampling failure rate of 16.5%. From the sampling of 129 batches of products produced by enterprises in Zhejiang Province, 33 batches of which were unqualified, and the sampling failure rate was 25.6%. The specific sampling situation of each product is as follows.
Ceramic bidet
The sampling failure rate of 12.4%
The sampling of 257 انٹرپرائزز میں 13 صوبے (شہر) produced 259 مصنوعات کے بیچ, جس میں سے 32 batches are unqualified, and the sampling failure rate is 12.4%. This is a decline of 1.6 percentage points from the last sampling. The sampling failure rate of the product in the past three years were 13.4%, 14.0%, 12.4%.
The sampling focused on the toilet water consumption, discharge function, sewage replacement function, safe water level, toilet water efficiency level, toilet water efficiency limit value, inlet valve sealing, inlet valve pressure resistance, anti-siphon function and other 20 اشیا کا تجربہ کیا گیا. Unqualified items are related to the toilet water consumption, water seal depth, toilet water seal surface size, washing function, water seal back to the function, safe water level, toilet water efficiency level, toilet water efficiency limit value, inlet valve CL mark, water tank safe water level and other 10 اشیا. By the technical institutions, the main reason for the failure of ceramic toilet products: پہلے, China’s sanitary ceramics industry is dominated by small and medium-sized enterprises. Part of the small and micro-enterprise production automation is not high, so the quality of products is not stable. دوسرا, some manufacturers are not strict quality control, and did not follow the standard requirements for the purchase of components and factory inspection.
The sampling inspection was conducted in Guangdong Province, صوبہ ہینن, Fujian Province and other industrial clusters of production enterprises. ان میں, 185 batches of products produced by enterprises in Guangdong Province were sampled and inspected, with a sampling failure rate of 15.1%. They also sampled and tested 22 batches of products produced by enterprises in Henan Province, with a sampling failure rate of 4.5%. They sampled and tested 21 batches of products produced by enterprises in Fujian Province, with a sampling failure rate of 4.8%.
Intelligent toilet
The sampling failure rate of 8.5%
The sampling is the circulation of sampling. They sampled 106 تیار کردہ مصنوعات کے بیچ 68 انٹرپرائزز میں 10 صوبے (شہر), اور اسے پایا 9 بیچوں کو نااہل کردیا گیا تھا, with a sampling failure rate of 8.5%. The rate of failure for the last three sampling inspections of the product was 2.7%, 3.8% اور 8.5% بالترتیب.
The sampling focused on the water temperature characteristics, nozzle self-cleaning, sitting ring heating function, the protection of touch and live parts, گرمی, internal wiring and other 41 اشیا کا تجربہ کیا گیا. Failed projects involve the input power and current, protection of touch and live parts, ساخت, گراؤنڈنگ اقدامات. After analysis by technical institutions, the main reasons for the failure of intelligent toilet products are: پہلے, the product structure is unreasonably designed to lead to the risk of use. دوسرا, the intelligent toilet manufacturers are mostly small and micro enterprises, insufficient investment in research and development, limited quality management level, and the quality of products is not guaranteed.
The sample inspection was carried out in Guangdong Province, صوبہ جیانگ, Fujian Province and other industrial clusters of production enterprises. ان میں, they sampled and tested 46 batches of products produced by enterprises from Guangdong Province, with a sampling failure rate of 10.9%. They also sampled and tested 21 batches of products from enterprises in Zhejiang Province, with a sampling failure rate of 4.8%, and they sampled and tested 14 batches of products from enterprises in Fujian Province, with a sampling failure rate of 21.4%.
Non-contact spout
The sampling failure rate of 32.9%
The sampling of 79 batches of products are produced by 79 انٹرپرائزز میں 10 صوبے (شہر). They found 26 batches of unqualified, with a sampling failure rate of 32.9%. This is 14.6 percentage points higher than the last sampling. The sampling failure rate of the product in the past three years was 56.0%, 18.3% اور 32.9%.
The sampling focused on the appearance of quality, حفاظت کی کارکردگی, سگ ماہی کی کارکردگی, strength performance, control distance, energy consumption of the whole machine, بجلی کی ناکامی کا تحفظ, water strike performance, water efficiency level of the spout, water flow, flow uniformity, flow performance, electric shock protection and other 17 اشیا کا تجربہ کیا گیا. In addition to strength performance, سگ ماہی کی کارکردگی, resistance to installation load, anti-electricity protection, حفاظت کی کارکردگی, opening and closing time and other six projects, other projects were found to be unqualified. ان میں, 15 batches of products were found to be unqualified flow uniformity project, 14 batches of products failed the water impact performance project. After analysis by technical institutions, the main reasons for the product failed: پہلے, some manufacturers are not officially implemented on January 1, 2021, based on the mandatory national standard GB 25501-2019 “water spout water efficiency limits and water efficiency levels” پیداوار کے لئے. دوسرا, some enterprises are not strict internal quality management, and did not carry out effective factory inspection.
They sampled the production enterprises in Guangdong Province, فوجیان صوبہ, Zhejiang Province and other industrial clusters. ان میں, they sampled and inspected 27 batches of products produced by enterprises from Guangdong Province, with a sampling failure rate of 11.1%. They sampled and inspected 20 batches of products from enterprises in Fujian Province, with a sampling failure rate of 35.0%. They sampled and tested 15 batches of products from enterprises in Zhejiang Province, with a sampling failure rate of 66.7%.
Ceramic piece sealing spout
The sampling failure rate of 16.9%
They sampled 260 تیار کردہ مصنوعات کے بیچ 256 انٹرپرائزز میں 11 صوبے (شہر), اور اسے پایا 44 بیچ ناکام ہوگئے, with a sampling failure rate of 16.9%. This is 0.7 percentage points higher than the last sampling. The sampling failure rate of the product in the past three years were 13.1%, 16.2%, 16.9%.
The sampling focused on the accuracy of the pipe thread, hot and cold water sign, metal contaminant precipitation, water pressure mechanical properties, سگ ماہی کی کارکردگی, بہاؤ, سطح کی سنکنرن مزاحمت, flow uniformity, water efficiency level of the spout and other nine items were tested. In addition to the mechanical properties of water pressure resistance, sealing performance and other 2 منصوبے, other projects were found to be unqualified. ان میں, they found that 19 batches of products failed the accuracy of the pipe thread project, 16 batches of products failed the flow uniformity project, 15 batches of products failed the surface corrosion resistance project. After analysis by technical institutions, the main reason for the failure of ceramic chip seal spout products is that the products are manufactured by small and micro enterprises. They are not strict quality control of outsourced raw materials and accessories, or their plating process has problems.
They have sampled the production enterprises in Fujian Province, گوانگ ڈونگ صوبہ, Zhejiang Province and other industrial clusters. ان میں, they sampled and inspected 119 batches of products from enterprises in Fujian Province, with a sampling failure rate of 21.8%. They sampled and inspected 92 batches of products from enterprises in Guangdong Province, with a sampling failure rate of 10.9%. They also sampled and tested 31 batches of products from enterprises in Zhejiang Province, with a sampling failure rate of 19.4%.
Showerhead
The sampling failure rate of 12.2%
They sampled 131 تیار کردہ مصنوعات کے بیچ 131 enterprises in six provinces (شہر), and found 16 بیچ ناکام ہوگئے, the sampling failure rate of 12.2%. This is 7.8 percentage points lower than the last sampling. The sampling failure rate of the product in the past three years were 11.2%, 20.0%, 12.2%.
The sampling focused on the accuracy of the pipe thread, حفاظت کی کارکردگی, emergency cold and heat resistance, سنکنرن مزاحمت, سگ ماہی کی کارکردگی, مکینیکل طاقت, بہاؤ, overall tensile performance, temperature drop, handheld shower anti-siphon performance and other 10 اشیا کا تجربہ کیا گیا. Failed items are related to the accuracy of the pipe thread, سنکنرن مزاحمت, بہاؤ, hand-held shower anti-siphon performance. Analysis by technical institutions, shower products failed mainly because: پہلے, in the processing and manufacturing process, the enterprise’s thread processing accuracy is not enough, and the surface plating process is not good, or not supporting the anti-siphon device. دوسرا, enterprises do not understand the product standards, not supporting the installation of water-saving tablets, which led to a large flow. The sampling inspection was carried out in Fujian Province, گوانگ ڈونگ صوبہ, Zhejiang Province and other industrial clusters of production enterprises. ان میں, they sampled and inspected 59 batches of products produced by enterprises from Fujian Province, with a sampling failure rate of 5.1%. They sampled and inspected 44 batches of products from enterprises in Guangdong Province, with a sampling failure rate of 4.5%. They also sampled and tested 25 batches of products from enterprises in Zhejiang Province, with a sampling failure rate of 44.0%.
Bathroom furniture
The sampling failure rate of 14.2%
They sampled 106 تیار کردہ مصنوعات کے بیچ 106 انٹرپرائزز میں 9 صوبے (شہر), اور اسے پایا 15 بیچ ناکام ہوگئے, with a sampling failure rate of 14.2%, اوپر 5.3 percentage points from the last sampling. The sampling failure rate of the product in the past three years were 6.2%, 8.9%, 14.2%.
The focus of the sampling counters on the physical and chemical properties of the counter surface of the basin, the physical and chemical properties of the wooden parts of the surface coating, soft and hard cover physical and chemical properties, metal surface coating physical and chemical properties, metal plating layer salt spray resistance, product water resistance, floor counter surface vertical impact, hanging cabinets (سمتل) limit strength, wood products harmful substances limit, product radioactivity and other 10 categories of 24 اشیا کا تجربہ کیا گیا. Failed projects involve the physical and chemical properties of the counter surface of the basin, the physical and chemical properties of the surface paint film of wooden parts, wood products harmful substances limit. After analysis by technical institutions, the main reason for the failure of bathroom furniture products is the use of inferior raw materials to reduce costs, or uneven coating of paint film.
They have sampled the Guangdong Province, صوبہ جیانگ, فوجیان صوبہ, Henan Province and other industrial clusters of production enterprises. ان میں, they sampled and inspected 56 batches of products produced by enterprises from Guangdong Province, with a sampling failure rate of 12.5%. They sampled and tested 23 batches of products produced by enterprises from Zhejiang Province, with a sampling failure rate of 8.7%. They also sampled and tested 10 batches of products from enterprises in Fujian Province, with a sampling failure rate of 20.0%. They also sampled and tested 9 batches of products from enterprises in Henan Province, with a sampling failure rate of 22.2%.
Household stainless steel sink
The sampling failure rate of 16.3%
They sampled six provinces (شہر) 91 کاروباری اداروں نے تیار کیا 92 مصنوعات کے بیچ, اور اسے پایا 15 بیچ ناکام ہوگئے, with a sampling failure rate of 16.3%. This is 9 percentage points lower than the last sampling. پچھلے تین سالوں میں, the sampling failure rate of the product was 29.0%, 25.3%, 16.3%.
The sampling focused on the drain wall thickness, drainage mechanism drainage time, drainage mechanism sealing performance, bearing performance and other 11 items were inspected. Failed items involve the use of overflow parts performance, drainage mechanism wall thickness, material chemical composition (نکل, کرومیم). ان میں, 13 batches of products were found to be unqualified for the drainage mechanism wall thickness project. The project in two consecutive years of sampling were found to be more prominent problems. After analysis by technical institutions, the main reason for the failure of household stainless steel sink products: پہلے, the size of the product overflow design is small or overflow structure is unreasonable, resulting in poor overflow capacity of the sink. دوسرا, companies choose thinner drainage mechanism components to reduce production costs. This leads to the unqualified wall thickness of the drainage mechanism. تیسرا, enterprises use low corrosion resistance of stainless steel materials for production and processing.
The sampling inspection was conducted in Guangdong Province, فوجیان صوبہ, Zhejiang Province and other industrial clusters of production enterprises, جس میں سے 56 batches of products produced by enterprises from Guangdong Province were sampled and inspected, and the sampling failure rate was 17.9%. They sampled and tested 18 batches of products produced by enterprises from Fujian Province, with a sampling failure rate of 5.6%. They also sampled and tested 9 batches of products produced by enterprises from Zhejiang Province, with a sampling failure rate of 33.3%.
