VIGA tells you that the basin faucet below 100 yuan should be bought cautiously!

Most of the faucets below 100 yuan are unqualified, and the screw thread precision has great problems.

hutian Daily” teamed up with Wuhan Quality Supervision Bureau , who invited consumers as mystery customers to purchase bathroom faucets mixer and angle valves randomly in the Wuhan market. حال ہی میں, the test results were showed that Among the 10 batches of faucets sent for inspection, 4 batches were unqualified, and the failure rate was 40%.

کے درمیان 10 batches of angle valves, 1 batch was unqualified and the failure rate was 10%.

The problem is that the pipe thread accuracy is unqualified.

The product that was sent to the inspected office by consumers is the ceramic sheet sealing faucet (ٹونٹی) and angle valve that are purchased in the current home improvement project. The test results showed that the qualified batch rate was 60.0% in the 10 batches of ceramic sealing nozzles, and the qualified rate was 90.0% in the 10 batches of angle valves. The unqualified items detected by both products are not in compliance with the screw thread precision.

According to the inspection expert, the pipe screw thread accuracy refers to the accuracy specification of the thread at the junction of the nozzle or angle valve and the water pipe. According to the national regulations, the pipe thread precision of the faucet shall comply with the provisions of GB18145-2014 “Ceramic plate sealing faucets”, wherein the external thread according to GB/T 7307-2001 shall not be lower than Class B accuracy.

If this item is unqualified, there may be a quality hazard in the sealing faucet, angle valve assembly and connection, or the installed faucet, the internal thread of the angle valve is damaged, or there is a small crack, which takes a long time or encounters. The impact of bad weather may cause the faucet and angle valve to rupture or fall off. Suddenly, a large amount of water will cause the home decoration to be immersed in water, causing greater property damage to consumers.

It is understood that the main reasons for the failure of the pipe thread are:

1. a) For non-plated parts, the direct cause is that the precision of the used tool is not enough or the accuracy is not met by the use of the tool. The process is not controlled, and the necessary inspection of the tool is not performed;
2. بی) For the case that needs to be plated, the main reason is that the thickness of the plating layer is not well controlled, resulting in insufficient precision;
3. c) Under-recognition, it is okay to think that the thread is loose, as long as you use more sealed raw material tape.

A copper faucet cost at least 100 یوآن

ٹونٹی کے لیے اہم خام مال (تانبا) تانبا ہے. As of March 27, 2017, the price of pure copper was around 46,000 یوآن/ٹن. صنعت کے معیار کے مطابق, ایک نل کے بارے میں استعمال کرتا ہے 500 تانبے کے گرام, so the cost of a faucet of light copper is around 30 یوآن. اگر آپ دیگر معاون خام مال جیسے زنک مرکب کو شمار کرتے ہیں۔ (کے بارے میں 24,000 یوآن / ٹن), علاوہ دیگر اجزاء, مزدوری, پروسیسنگ فیس, مال برداری, ایجنسی کی فیس, پانی اور بجلی, وغیرہ, ایک عام تانبے کی نل, direct manufacturing costs will not be low At 100 یوآن.

سب سے پہلے, the price of the products sampled by the Wuhan Municipal Quality Supervision Bureau is between 15 اور 35 یوآن, which is less than 100 یوآن, and most of them have quality problems. اپریل میں 2016, the Suzhou Municipal Quality Supervision Bureau reported a result of a faucet sampling test: 11 کی 50 batch samples sampled failed. ان میں, among the 13 batches of products from 100 کو 200 یوآن, there were 4 batches with problems, اکاؤنٹنگ کے لئے 30.8%; among the 6 batches of products below 100 یوآن, there were also 4 batches with problems, اکاؤنٹنگ کے لئے 66.7%. The results of the spot check showed that the lower the price, the more product quality problems.

Do not think that these low-priced inferior faucets have little effect, یہ آپ کے گھر کو برباد کر سکتا ہے.

1. مسٹر. Yao of Zhijiang City purchased a batch of sanitaryfaucetsproducts for the renovation of new houses in the sanitary ware store. The faucet of the bathroom broke on May 12, causing the newly renovated house to be soaked in water for several days. The loss was nearly 20,000 یوآن. After five months of negotiation and mediation, مسٹر. Yao finally received a compensation of 18,000 yuan from the faucet manufacturer in early November.
2. unexpectedly, in August ,elbow-type metal faucet burst, resulting in a new renovation of Mr.zhang new house floor, wooden furniture, a large area of water, causing a certain loss. Afterwards, he repeatedly found faucet owner but without Compensation , and he complained to the industry and commerce department about defending rights.
3. مسٹر. Sun of Xuzhou City reflected the new house he had just moved to. The faucet suddenly burst and the floor was soaked, causing heavy losses. At that time, because the manufacturer could not judge whether it was a human factor or a bad quality problem, the manufacturer did not promise to compensate.

Purchase reminder：

Experts suggest that when buying a washing basin faucet, the first thing to look at is whether the gilt plating surface is evenly glossy, and pay attention to defects such as peeling, کریکنگ, charring, exposed bottom, peeling off, سیاہ دھبوں اور واضح پٹنگ. The sprayed surface should be fine, smooth and uniform, and there must be no defects such as sag and exposed bottom. The hand touches no burr and sand grain. The above defects will directly affect the service life of the faucet.

Whether The faucet will لیک,پہلے the thread precision is the key

دوم, the pipe thread precision is the guarantee for the reliable connection of the nozzle with the hose or pipe. جب خریداری کرتے ہو, it is necessary to visually inspect the thread surface for obvious defects such as dents and broken teeth. خاص طور پر, the screwing of the pipe thread and the connecting piece should be noted. موثر لمبائی مہر کی وشوسنییتا کو متاثر کرے گی. Pay attention to the effective length of the pipe thread and the thickness of the thread when purchasing. It is recommended to select the thread with the wall thickness.

آخر میں, the faucet handle is turned, there is no excessive gap between the high-quality nozzle switches, the opening and closing is easy and unobstructed, and the slip is not slippery. The gap of the inferior faucet is larger and the resistance is stronger.

تو,It is well known that when you buy inferior faucets, you are happy to bargain successfully,but it is not happy when you use it. Brand faucet is expensive, it is distressed when you give money! But it is happy every day when use it.and you will feels especially worthwhile!

یاد رکھیں: Cheapest is the dearest.