iVIGA Tap Factory yetkazib beruvchi
What should I do if the shower sprinkler has small water flow, oqish, or is blocked?
Showers are commonly used at home. What if one day suddenly finds that the water flow is very small, the shower is leaking, or the shower is blocked? Do you know how to fix it? Is it the cause? Let’s take a look at how to deal with these things.
What is the reason for the small water sprinkling
Whether it is a workplace worker who is mentally stressed or a worker who consumes a lot of physical energy, whenever the body and mind is exhausted, just take a decompression hot bath to refresh and refresh. The blood is resurrected, but it is drizzle when the flower is opened?
1. Is the tap water pressure of the user’s home smaller than before: Agar shunday bo'lsa, you need to find a tap water company to check the water supply pipeline and pressure
2. The valve of the pipeline connected to the water heater is opened smaller: open the water inlet valve larger.
3. Due to the high floor and the low water pressure of the water source, the water output will be smaller after the pressure is reduced by the mixing valve. Ushbu paytda, it is recommended to connect a water heater in series between the water supply valve and the water inlet Booster pump.
4. The water mixing valve is congenital inadequate, the diameter is small, and the throttling causes the water output to become small: the inlet end of the detachable water mixing valve, try to connect it to the water heater’s water supply valve with a hose, or connect the nozzle hose directly to Try the hot water outlet end of the water heater, and distinguish the quality of the mixing valve according to the water output of the nozzle; replace the mixing valve of the formal brand under the premise of the water pressure of the water source.
5. Noto'g'ri o'rnatish, deformed rubber ring, uneven or thin water outlet pipe joint, mismatch between hose and shower, va boshqalar.: Select the appropriate hose and shower according to the specifications, rezina uzukni almashtiring, va qayta o'rnating.
6. The sprinklers are congenital insufficiency and large internal resistance leads to small water output: replace the sprinklers.
7. The shower pipe is broken, and the pipe is clogged to prevent water: the water pipe needs to be protected during use. Although the creases will not only affect the appearance, but there are many creases that are prone to water leakage.
8. The nozzle is clogged, resulting in poor water flow. Umuman, if the water in the home is too alkaline and contains some impurities, it is easy to block the shower holes; bunga qo'chimcha, air deposits and dust will enter the interior through the shower holes and accumulate for a long time. It will also block the shower; improper adjustment of the shower nozzle may also cause the increase of foreign matter and scale.
The solution to the nozzle blockage
1. Rotate and adjust the shower nozzle.
2. After disassembling the nozzle, place the nozzle with the spray eye facing upward, and find a soft object to gently touch it to shake off the clogged gravel. Xuddi o'sha payt, clean the nozzles one by one, and then repeatedly clean them with clean water. , Then install and restore.
3. Go to the supermarket to buy a bottle of descaling agent to remove dirt, and remove the shower head. Put it in the water and clean it well with a descaling agent, and generally it will be faster to clean it with warm water. After rinsing, be sure to wipe off the descaling agent left on the shower head, and then install the shower head as it was.
4. Take out a little vinegar (rice vinegar) and immerse the shower in the vinegar. Be sure to immerse all the small holes in the vinegar. Wait about ten minutes before taking it out, and then rinse with water to remove the vinegar remaining in the shower.
Bunga qo'chimcha, if your shower head is fixed on the wall, it cannot be removed and soaked in vinegar. You can fill the sprinkler with a plastic bag filled with vinegar, stick it with tape and let it sit overnight, and then remove the vinegar bag the next morning. But be careful not to stick the tape to the wire board or paint.
Xuddi o'sha payt, be careful not to use strong acid when removing scale, so as not to cause corrosion to the shower surface.
What should I do if the shower is leaking?
Shower blockage problem
If the shower nozzle is used for a long time, the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to be blocked. Ushbu paytda, the brand’s after-sales service will be effective. When buying a shower, you don’t have to choose well-known brands, but you must choose those brands that everyone recognizes.
Shower plating problem
It is ugly to see the paint peeling off the coating of the shower head. If you have just bought the shower head for a short time, this problem will affect the appearance. Bunga qo'chimcha, some poor-quality showers will block because of paint falling off. So we have to take a closer look at whether there are any problems with the surface of the purchased shower head.
When buying a shower, you must carefully observe whether the surface of the shower is smooth or not. If it feels a bit rough to the touch, it must be a second-processed shower, let alone the quality.
Material problem
Some showers are made of plastic or cast iron. Plastic materials may add a lot of waste, and the service life will not be very long. Albatta, some hand-held showers can use organic glass ABS and other materials. Biroq, it is not recommended that you choose the shower head made of cast iron, which is extremely easy to rust. Many customers regretted the purchase of this shower head. Because it didn’t take long before it started to rust. Even if it looks ugly, it also clogs the water outlet, it is best if the entire shower is broken. Ayni paytda, the best material is pure copper shower head. If it is good in the market, most of it is made of pure copper.
What should I do if the shower head leaks?
1. Dush boshi oqayotgan yoki yo'qligini qanday aniqlash mumkin
1. Dush boshining suv chiqishini kaftingiz bilan yoping, and use your mouth to blow into the water inlet to check whether there is water leakage. Agar oqish bo'lsa, dush boshi oqadi.
2. When the shower head is flowing with water, it is slightly tilted on one side when the water is discharged, dush boshi oqayotganini ko'rish oson.
3. Multifunctional shower heads are the easiest to leak when they have dual functions. Ba'zi dush boshlari faqat bitta naqshda suv oqmaydi, but it is difficult to ensure that they will not leak under dual functions.
2. Dush boshidagi suv oqishi muammosini qanday hal qilish mumkin
1. Dush boshining rul sharidagi qochqinni tuzating.
Yechimi: Avval dush boshini rul sharining halqasidan burab qo'ying, ichida O-ring yoki shunga o'xshash muhrni toping va uni almashtiring, keyin dush boshini asl holatiga qaytaring.
2. Leakage occurs at the joint of the shower head handle.
Yechimi: Xususiyatlar bo'yicha tegishli dush shlangi va kranni tanlang, uning kauchuk halqasini almashtiring, va uni qayta o'rnating. Dush boshining tutqichini shlangdan burab olish uchun avval bog'lovchi penslardan foydalaning. Dush boshining tutqichidagi ipni tozalang, va suv quvurini maxsus yopishtiruvchi bilan yoping yoki atrofdagi suv quvurini maxsus lenta bilan bog'lang. Keyin dush boshini orqaga burang va mahkamlang, va ortiqcha yopishqoq va lentani olib tashlang.
3. Dush boshidagi suvning oqishi, shuningdek, dush boshidagi qum yoki cho'kindi ham sabab bo'lishi mumkin, yoki to'plangan dander va foydali qazilmalar konlari.
Yechimi: Tozalash uchun dush boshini burab qo'ying. Agar kerak bo'lsa, qismlarni sirka bilan namlang, va qismlarni tozalang, ularni qirib tashlamaslik uchun ehtiyot bo'ling. Dush boshi sozlanishi buzadigan amallar turi bo'lsa, haddan tashqari eskirish belgilari uchun barcha harakatlanuvchi qismlarni diqqat bilan tekshiring. Aylanadigan tutqich silliq harakat qila olmasa yoki ichki kamera buzilgan bo'lsa, butun dush boshini almashtirish kerak.
4. Dush boshidagi nozik suv qo'pol va nozik aralashmaga aylanadi.
Yechimi: Dush boshini aylantiring va sozlang. Agar u hali ham ishlamasa, dush boshining o'rtasida joylashgan kichik dumaloq qopqoqni tornavida bilan oching, dush boshini oching va suv bilan yuving. Bundan tashqari, dush teshigini tish cho'tkasi bilan tozalashingiz mumkin, va keyin uni o'rnating va tiklang. mumkin.
Agar dush oqayotgan bo'lsa, nima qilish kerak, bizga dush muammosini qanday hal qilishni o'rgatadi. Biroq, dushdagi suv oqishi muammosini butunlay yo'q qilish, kafolatlangan sifatga ega mahsulotlarni sotib olish kerak, parvarishlashga e'tibor bering, va xizmat muddati tugaganda ularni o'z vaqtida almashtiring. Har bir qadam joyida kuzatilishi kerak.
Dush boshi bloklangan bo'lsa, nima qilishim kerak?
Uzoq muddatli foydalanishdan keyin, dush boshi bloklanadi. Bu tabiiy. Bu dush boshi buzilgan degani emas. Xavotir olmang, umuman yangisini sotib olishingiz shart emas. Bu uzoq muddatli suv oqizishdan keyin shkala shakllanishiga bog'liq. , Faqat dush boshini qismlarga ajratish va tozalash kerak.
Dip in vinegar
Agar dush boshingiz uzoq vaqt davomida bloklangan bo'lsa, va ko'p sonli teshiklar to'sib qo'yilgan. So using a needle to pierce one by one is obviously not showing up. Ushbu holatda, tiqilib qolgan dush boshlari muammosini hal qilish uchun changni tozalash uchun kislotalashdan foydalanish tavsiya etiladi. Bir oz oq sirka tayyorlashingiz kerak. Dush boshi suv ostida qolishi uchun sirkani havzaga to'kib tashlang. Taxminan o'n daqiqa davomida sirka ichiga solingandan keyin, dush boshidagi o'lchovni olib tashlash mumkin.
Acupuncture
Uyingizdagi dushning ba'zi kichik teshiklari tiqilib qolsa, then let the water out first, and you can see that the holes are blocked at the bottom. Keyin dushning dush boshini ochishingiz kerak va dush boshida dush boshiga o'xshash juda ko'p kichik teshiklar borligini ko'rishingiz kerak.. Bu erdan suv chiqadi. Keyin biz birinchi navbatda igna tayyorlaymiz, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. Ushbu usul eng to'g'ri, lekin dush teshigini teshish uchun ehtiyot bo'ling.
Moylash vositasidan foydalaning
If the metal of the shower head is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. This method may be used if the shower head in your home is not made of stainless steel.
