iVIGA 水龙头工厂供应商
What should I do if the shower sprinkler has small water flow, 泄漏, or is blocked?
Showers are commonly used at home. What if one day suddenly finds that the water flow is very small, the shower is leaking, or the shower is blocked? Do you know how to fix it? Is it the cause? Let’s take a look at how to deal with these things.
What is the reason for the small water sprinkling
Whether it is a workplace worker who is mentally stressed or a worker who consumes a lot of physical energy, whenever the body and mind is exhausted, just take a decompression hot bath to refresh and refresh. The blood is resurrected, but it is drizzle when the flower is opened?
1. Is the tap water pressure of the user’s home smaller than before: 如果是这样, you need to find a tap water company to check the water supply pipeline and pressure
2. The valve of the pipeline connected to the water heater is opened smaller: open the water inlet valve larger.
3. Due to the high floor and the low water pressure of the water source, the water output will be smaller after the pressure is reduced by the mixing valve. 此时, it is recommended to connect a water heater in series between the water supply valve and the water inlet Booster pump.
4. The water mixing valve is congenital inadequate, the diameter is small, and the throttling causes the water output to become small: the inlet end of the detachable water mixing valve, try to connect it to the water heater’s water supply valve with a hose, or connect the nozzle hose directly to Try the hot water outlet end of the water heater, and distinguish the quality of the mixing valve according to the water output of the nozzle; replace the mixing valve of the formal brand under the premise of the water pressure of the water source.
5. 安装不当, deformed rubber ring, uneven or thin water outlet pipe joint, mismatch between hose and shower, ETC。: Select the appropriate hose and shower according to the specifications, 更换橡胶圈, 并重新安装.
6. The sprinklers are congenital insufficiency and large internal resistance leads to small water output: replace the sprinklers.
7. The shower pipe is broken, and the pipe is clogged to prevent water: the water pipe needs to be protected during use. Although the creases will not only affect the appearance, but there are many creases that are prone to water leakage.
8. The nozzle is clogged, resulting in poor water flow. 一般来说, if the water in the home is too alkaline and contains some impurities, it is easy to block the shower holes; 此外, air deposits and dust will enter the interior through the shower holes and accumulate for a long time. It will also block the shower; improper adjustment of the shower nozzle may also cause the increase of foreign matter and scale.
The solution to the nozzle blockage
1. Rotate and adjust the shower nozzle.
2. After disassembling the nozzle, place the nozzle with the spray eye facing upward, and find a soft object to gently touch it to shake off the clogged gravel. 同时, clean the nozzles one by one, and then repeatedly clean them with clean water. , Then install and restore.
3. Go to the supermarket to buy a bottle of descaling agent to remove dirt, and remove the shower head. Put it in the water and clean it well with a descaling agent, and generally it will be faster to clean it with warm water. After rinsing, be sure to wipe off the descaling agent left on the shower head, and then install the shower head as it was.
4. Take out a little vinegar (rice vinegar) and immerse the shower in the vinegar. Be sure to immerse all the small holes in the vinegar. Wait about ten minutes before taking it out, and then rinse with water to remove the vinegar remaining in the shower.
此外, if your shower head is fixed on the wall, it cannot be removed and soaked in vinegar. You can fill the sprinkler with a plastic bag filled with vinegar, stick it with tape and let it sit overnight, and then remove the vinegar bag the next morning. But be careful not to stick the tape to the wire board or paint.
同时, be careful not to use strong acid when removing scale, so as not to cause corrosion to the shower surface.
What should I do if the shower is leaking?
Shower blockage problem
If the shower nozzle is used for a long time, the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to be blocked. 此时, the brand’s after-sales service will be effective. When buying a shower, you don’t have to choose well-known brands, but you must choose those brands that everyone recognizes.
Shower plating problem
It is ugly to see the paint peeling off the coating of the shower head. If you have just bought the shower head for a short time, this problem will affect the appearance. 此外, some poor-quality showers will block because of paint falling off. So we have to take a closer look at whether there are any problems with the surface of the purchased shower head.
When buying a shower, you must carefully observe whether the surface of the shower is smooth or not. If it feels a bit rough to the touch, it must be a second-processed shower, let alone the quality.
Material problem
Some showers are made of plastic or cast iron. Plastic materials may add a lot of waste, and the service life will not be very long. 当然, some hand-held showers can use organic glass ABS and other materials. 然而, it is not recommended that you choose the shower head made of cast iron, which is extremely easy to rust. Many customers regretted the purchase of this shower head. Because it didn’t take long before it started to rust. Even if it looks ugly, it also clogs the water outlet, it is best if the entire shower is broken. 现在, the best material is pure copper shower head. If it is good in the market, most of it is made of pure copper.
What should I do if the shower head leaks?
1. 如何判断花洒头是否漏水
1. 用手掌盖住淋浴喷头的出水口, and use your mouth to blow into the water inlet to check whether there is water leakage. 如果有泄漏, 淋浴喷头会漏水.
2. When the shower head is flowing with water, it is slightly tilted on one side when the water is discharged, 很容易看出淋浴喷头是否漏水.
3. Multifunctional shower heads are the easiest to leak when they have dual functions. 有些淋浴喷头仅在一种模式下不漏水, but it is difficult to ensure that they will not leak under dual functions.
2. 如何解决花洒头漏水问题
1. 修复花洒头转向球处漏水.
解决方案: 首先将花洒头从转向球环上拧下来, 找到内部的 O 形圈或类似密封件并将其更换, 然后将淋浴头旋转回原来的位置.
2. Leakage occurs at the joint of the shower head handle.
解决方案: 根据规格选择合适的淋浴软管和龙头, 更换橡胶圈, 并重新安装它. 首先使用绑扎钳从软管上拧下淋浴喷头手柄. 清洁花洒手柄上的螺纹, 并在周围涂上水管专用胶或绑上水管专用胶带. 然后将淋浴喷头转回并拧紧, 并去除多余的粘合剂和胶带.
3. 淋浴头漏水也可能是由于淋浴头内的沙子或沉积物造成的, 或积累的皮屑和矿物质沉积物.
解决方案: 拧开淋浴喷头进行清洁. 如果需要的话, 用醋浸泡零件, 并擦洗零件, 小心避免刮伤它们. 如果淋浴喷头是可调节喷雾类型, 仔细检查所有活动部件是否有过度磨损的迹象. 如果旋转手柄不能顺利移动或内部凸轮损坏, 整个淋浴喷头需要更换.
4. 从淋浴喷头流出的细水变成粗水和细水的混合物.
解决方案: 旋转和调整淋浴喷头. 如果还是不行, 用螺丝刀打开莲蓬头中间的小圆帽, 打开淋浴头并用水冲洗. 也可以用牙刷刷一下淋浴孔, 然后安装并恢复它. 能.
淋浴房漏水怎么办教我们如何解决淋浴房的问题. 然而, 彻底杜绝淋浴漏水问题, 一定要购买质量有保证的产品, 注意保养, 并在使用寿命到达后及时更换. 每一步都必须跟进到位.
淋浴喷头堵了怎么办?
经过长时间的使用, 淋浴喷头会被堵塞. 这是自然的. 这并不意味着淋浴喷头坏了. 不用担心, 你根本不需要买一个新的. 这是由于长期排水后形成水垢所致. , 只需要将花洒头拆开清洗即可.
Dip in vinegar
如果您的淋浴喷头长期被堵塞, 并且大量的洞口已经被堵住. So using a needle to pierce one by one is obviously not showing up. 在这种情况下, 建议您使用酸化除尘来解决花洒喷头堵塞的问题. 你需要准备一些白醋. 将醋倒入盆中，使花洒头没过即可. 用醋浸泡十分钟左右后, 淋浴喷头上的水垢可以去除.
Acupuncture
如果你家淋浴间的一些小孔被堵住了, then let the water out first, and you can see that the holes are blocked at the bottom. 然后你要把花洒的花洒头打开，看到花洒头上有很多像花洒一样的小孔. 这是水出来的地方. 那么我们首先准备一根针, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. 这个方法最简单, 但要小心刺破淋浴孔.
使用润滑剂
If the metal of the shower head is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. This method may be used if the shower head in your home is not made of stainless steel.
