VIGA teaches you how to clean the hand shower and shower head.

When choosing a shower column set, you should pay attention to the points. First, whether the hand shower and shower head is easy to clean. Some hand shower and shower head styles are beautiful, but it is very troublesome to clean. Therefore, you need to choose according to your actual situation. Secondly, the hand shower and shower head is water-saving capacity, each type of hand shower and shower head have the strength of water-saving ability, so pay attention to when purchasing; Finally, the material of the hand shower and shower head, the materials used in the hand shower and shower head on the market are mostly ABS, but also relatively high-grade brass the hand shower and shower head can be chosen according to your own preferences.

The most common problem with hand shower and shower heads is the blockage of the water outlet. The reason why the water outlet is blocked is that the hand shower and shower head is used for too long, so the scale will block the water outlet, and the water will be blocked because the water contains impurities. This will not happen.

In order to avoid the hand shower and shower head plugging during bathing, it is necessary to clean it up after a period of use (usually three months or half a year).

The first is to disassemble the hand shower and shower head. You need to know the internal structure when disassembling. If you don’t know, you can check the instructions or ask the seller. After disassembling, remove the screen cover from the hand shower and shower head to remove impurities.

1.Use lubricant

If the metal of the hand shower and shower head head is rusted and the blockage is very serious, then the WD-40 rust and rust preventive lubricant is used. This rust-reducing lubricant has very good affinity and permeability to metals. The rust layer and the metal layer can be separated. Make the rusted part and the metal contact surface and leave a protective film. Let the hand shower and shower head never die. This method may be used if your hand shower and shower head is not made of stainless steel.

2.Dip with vinegar

If your hand shower and shower head head has been blocked for a long time, and a lot of holes are blocked. Then using a needle to puncture one by one is obviously not very obvious. In this case, it is recommended that you use acidification and dust removal to solve the problem of hand shower and shower head hand shower and shower head blockage. You need to prepare some white vinegar and pour the vinegar into the basin so that the hand shower and shower head head can be immersed. After immersing the vinegar for about 10 minutes, use a toothbrush or a soft brush to clean it. Do not use a hard object such as a steel ball to forcibly wipe it. If you encounter a stain that is difficult to remove, you can cut a piece of fresh lemon to wipe the stain. Do not use a strong acid liquid to soak it to avoid corrosion.

3.Using acupuncture

If the hand shower and shower head in your home is blocked by some small holes, first release the water and see that the holes are blocked. Then you have to open the hand shower and shower head head of the hand shower and shower head and see that there are many small holes in the hand shower and shower head head like the hand shower and shower head head. This is where the water comes from. Then we will prepare a needle first, and then use the needle to see the hole in the hole that has just been punctured, until there is no impurity in the hole. This method is the most straightforward, but be careful to stab the hand shower and shower head hole.

Hand shower and shower head maintenance Tips

Careful corrosion: Strong acid is not available when removing scale to avoid corrosion on the hand shower and shower head surface.

Avoid scratching: Do not wipe the surface of the hand shower and shower head with a hard object such as a steel ball to avoid scratching the surface. The stain on the surface of the product can generally be cleaned with a soft rag. It can also be cleaned with a mild liquefied detergent or a colorless glass cleaner. Do not use acidic or abrasive cleaners to avoid damage to the surface and affect the appearance.

Do not dismantle: Do not disassemble the hand shower and shower head for repair. Improper disassembling may damage the appearance and internal structure of the product.

Keep away from heat sources: The ambient temperature of the hand shower and shower head should not exceed 70 degrees, so the installation of the hand shower and shower head should be as far away as possible from the electric heat source.