15 Years Professional Faucet Manufacturer

info@viga.cc +86-07502738266    |    


Faucet Knowledge

The sudden water flow after the shower is turned off is not a quality problem.

Sudden water flow after the shower is turned off, this is not a quality problem

In order to pursue the comfort of bathing, the current shower head sprays are quite large, and the larger the shower head means the more water there is after turning off the faucet. The water in the top spray and shower pipes may flow out after being turned off.


Then why does it sometimes flow out after being closed for a period of time? After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After a period of time, the water will flow out after losing the balance.

This is a problem that may exist in the shower. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.


How to judge whether the shower head is leaking

1. Cover the water outlet of the shower head with the palm of your hand, and use your mouth to blow into the water inlet to check for water leakage. If there is a leak, the shower head will leak.

2. When the shower head is running with water, it is slightly sideways when the water comes out, it is easy to see whether the shower head is leaking.

3. Multifunctional shower heads are most prone to leaking water under dual-function conditions. Some shower heads do not leak water only in one pattern, but it is difficult to ensure that they will not leak under dual-function conditions.

How to solve the problem of water leakage in the shower head

1. Repair the leakage at the steering ball of the shower head

Solution: First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then rotate the shower head back to its original position.

2. Leakage occurs at the connection of the shower head handle

Solution: Choose the appropriate shower hose and faucet according to the specifications, replace its rubber ring, and reinstall it. First use lashing pliers to unscrew the shower head handle from the hose. Clean the thread on the handle of the shower head, and coat the water pipe special adhesive or tie the water pipe special tape on the surrounding area. Then turn the shower head back and tighten it, and remove the excess adhesive and tape.

3. Water leakage in the shower head may also be caused by sand or sediment in the shower head, or accumulated dander and mineral deposits.

Solution: Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar, and scrub the parts, taking care to avoid scratching them. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly or the internal cam is broken, the entire shower head needs to be replaced.

4. The fine water from the shower head becomes a mixture of coarse and fine

Solution: Rotate and adjust the shower head. If it still does not work, open the small round cap in the middle of the shower head with a screwdriver, open the shower head and rinse with water. You can also brush the shower hole with a toothbrush, and then install and restore it. can.

What to do if the shower is leaking teaches us how to solve the problem of the shower. However, to completely eliminate the problem of water leakage in the shower, it is necessary to purchase products with guaranteed quality, pay attention to maintenance, and replace them in time when the service life is up. Every step must be followed up in place.

What should I do if the shower head is blocked?

After a long period of use, the shower head will be blocked. This is natural. This does not mean that the shower head is broken. Don’t worry, you don’t need to buy a new one at all. This is due to scale formation after long-term water discharge. , You only need to disassemble and clean the shower head.

1. Dip with vinegar

If your shower head has been blocked for a long time, and a large number of holes have been blocked. So using a needle to pierce one by one is obviously not ideal. In this case, it is recommended that you use acidification to remove dust to solve the problem of clogged shower heads. You need to prepare some white vinegar. Pour the vinegar into a basin so that the shower head can be submerged. After soaking in vinegar for about ten minutes, the scale in the shower head can be removed.

2. Use baking soda

Baking soda has many uses in our daily lives, and it can clean up all kinds of scales and stains. As for the method of baking soda to fix the problem of shower blockage, it can completely refer to its method of removing water bottle scale. The specific method is: pour about 500 grams of hot baking soda water with a concentration of 1% on the shower, gently shake and rinse, and the scale can be removed.

3. Use acupuncture

If some of the small holes in the shower in your house are blocked, let the water out first and see that the holes are blocked at the bottom. Then you have to open the shower head of the shower and see that there are many small holes on the shower head like a shower head. This is where the water comes out.

Then we first prepare a needle, and then use the needle to pierce the impurity in the perforation with the small hole that we saw just now, until there is no impurity in the hole. This method is the most straightforward, but be careful to puncture the shower hole.
If you have any doubts, please do not hesitate to contact us: info@vigafaucet.com

The sudden water flow after the shower is turned off is not a quality problem. - Faucet Knowledge - 1



Leave a Reply

Get a Quote ?